How To Operate - Nostalgia Products BSET100BC Manual De Instrucciones

Estación de desayuno 3-en-1
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

HOW TO OPERATE

Before first use, remove all accessories including Coffee Pot, Coffee Filter, Water
Tank, Non-stick Griddle Plate, and the Wire Rack/Oven Tray. Wash with clean
water to remove any debris. Dry parts thoroughly and reassemble.
Place the 3-IN-1 BREAKFAST STATION on a stable surface near an
electrical outlet before using to cook or brew coffee.
Always make sure that the cord is away from any water source.
Plug the cord into an electrical socket.
TOASTER OVEN
1.
For optimal performance, turn the Heating Modes switch to
(2) UPPER & LOWER and preheat appliance for 4-5 minutes.
2.
Once appliance is preheated, turn the Heating Modes switch to your desired position.
(1) LOWER: Only the lower heating element will heat up to bake,
which allows you to reheat food without roasting it.
(2) UPPER & LOWER: Both heating elements heat up to bake and roast the food.
(3) UPPER: Only the upper heating element heats up in order to
roast the food, or heat up the Non-stick Griddle Plate.
3.
Place the food to be cooked on the Wire Rack. If food contains oil, grease
or juices, first make sure the Oven Tray is in place on Wire Rack.
4.
Turn the Timer to the required cooking time. The Power Light
will come on, indicating that the oven is heating.
5.
If you are cooking food for less than 5 minutes, first turn the Timer past
the 5 minute mark and then back to the desired cooking time.
6.
A bell will ring to signal the end of the cooking cycle.
The appliance will switch off automatically.
7.
When cooking cycle has finished, turn the Heating Modes switch
to OFF, open the Oven Door and remove the food from the Wire
Rack and/or Oven Tray using an oven mitt or pot holder.
8.
Unplug appliance when finished and let it cool completely.
NON-STICK GRIDDLE
1.
Apply a thin coat of vegetable oil to surface of Non-stick Griddle Plate to protect finish.
2.
Turn Heating Modes switch to (3) UPPER to begin heating the
Non-stick Griddle Plate. Allow to preheat for 3-5 minutes.
3.
When preheated, begin to cook breakfast meat, eggs, silver dollar pancakes or
desired food item. Cooking time will vary depending on the items being cooked.
4.
When finished cooking, turn the Heating Modes switch to the OFF position and remove
food using a rubber spatula.
NOTE: NEVER use a metal spatula, fork or other utensil to remove
food, as this could scratch and damage the non-stick coating.
5.
Unplug appliance and allow to cool completely before
cleaning or removing Non-stick Griddle Plate.
7
Tabla de contenido
loading

Tabla de contenido