Lock N' Load User Information
For walkers 4200, 4201, 4202, 4203, 4207, 4208C, 4214, 4215, 4200C, 4202C, 4218, 4220, 4222, 4224:
Lock
1. Place the walker in the folded position and rest it on the rear wheels.
2. Grasp the contoured pad at the base of the Lock N Load and push upward until the tip is inserted into the hinge
opening (see image 12).
Unlock
1. Place the walker in the folded position and rest it on the rear wheels.
2. Grasp the contoured pad at the base of the Lock N Load and push downward until the tip is removed from the hinge
opening (see image 13).
3. Open the walker by squeezing the hand brakes and pushing forward.
Información Para el Usuario de Cierra y Abre ("Lock N' Load")
Para andaderas 4200, 4201, 4202, 4203, 4207, 4208C, 4214, 4215, 4200C, 4202C, 4218, 4220, 4222, 4224:
Cerrar
1. Coloque la andadera doblada en sus ruedas traseras.
2. Agarre la palanca de la base del 'Cierra y Abre' y empuje hacia arriba hasta que la punta de la palanca entre a la
abertura (vea imagen 12).
Para Abrir
1. Coloque la andadera doblada en sus ruedas traseras.
2. Agarre la palanca de la base del 'Cierra y Abre' y empuje hacia abajo hasta que la punta de la palanca salga de la
abertura (vea imagen 13).
3. Abra la andadera empujando los frenos de mano y empujando la hacia adelante.
How to Sit with a Rolling Walker
1. Lock the brakes by pushing down on the knob located at the rear of the brake handle until it locks in the downward
position.
2. Test the walker before sitting down to make sure that it will not roll.
3. Before sitting, touch the back of your legs to the edge of the seat to ensure proper positioning of the walker.
4. Use the handles to stabilize your body as you turn around.
5. Holding your hands on the handles, slowly lower your body onto the seat.
DO NOT support your full body weight on the handles when attempting to sit down.
Cruiser/Cruiser II/Cruiser Classic (4200/4201/4200C)
1. DO NOT support your weight on the handles when sitting down. The wheels do not lock in a parked position.
2. Use the handles to stabilize your body as you turn around.
3. Holding your hands on the foam handles, slowly lower your body onto the seat.
How to use Hand Brakes
Walkers with Locking Hand Brakes
1. Push down on the knob located at the rear of the hand brake handles (see image 14).
2. The handle will lock into a downward position when properly engaged.
Cruiser/Cruiser II/Cruiser Classic (4200/4201/4200C)
1. Push down on handles until rubber tip engages the ground.
Locked
image 12
Unlocked
image 13
