Installation - Wall-Mount; Important - ALTRA Flame E35WF Manual Del Usuario

Installation - Wall-mount

1. Removing the mounting bracket
Using a screwdriver, loosen the two screws that secure the
mounting bracket (C) to the top of the electric firebox (A), and
remove the mounting bracket (C).
2. Securing the mounting bracket
IMPORTANT: This unit is designed to be securely attached to a
wall or a fixed structure. Failure to do, so might result in
personal injury and/or property damages.
For Drywalls with Wood Studs
Use a stud finder to locate and mark the location of studs in your
wall. We recommend using a stud finder that can locate the
center of each stud. Verify the stud location by driving a thin nail
into the wall.
If your stud finder cannot locate the center of the stud, then you
will need to figure out the stud location manually by tapping a
thin nail at ½ inch intervals into the wall.
Drill a 3.5 mm diameter hole in the stud.
Use screws(③), supplied with this product, to attach the unit to
the studs.
Make sure all screws are fully attached to the wall and the unit is
secured.
③
For Masonry, Concrete, or other Walls and Structures
Consult your local hardware store for appropriate anchors to
securely attach this unit.
M 5 x 40
x 4
A
C
7/ 37
③