ALTRA Flame E35WF Manual Del Usuario página 12

Operation (continued)
USING THE THERMOSTAT CONTROL BUTTON
The heat button (3) turns the heater on and off.
With the unit ON, press the control panel heat button (3)
for 5 seconds and enter temperature adjustment mode.
In the adjustment mode, the digital indicator (5) will
flash.
Press the heat button (3) to change to the desired
temperature. There are 10 temperature settings.
Reference the table for more detailed information.
After the temperature is selected, the digital display (5)
will stay on for 10 seconds, then turn off.
USING THE TIMER CONTROL BUTTON
Pressing the timer control button (4) will set the timer.
This interval period is shown in the display (5) on the
control panel on the side of the electric fireplace. The
set intervals are as listed in the table.
NOTE: If this product experiences exceptionally high
temperature, it may automatically stop heating. If this
occurs the product should be unplugged or isolated
from the main supply for a period of 30 seconds before
the power is then re-supplied.
NO HEAT FUNCTION (DEMO MODE)
To turn off heat mode, press and hold the heat button for 10 seconds to enter heat lock out mode.
Ember bed lights will flash 6 times to signal the heat function is turned off and locked out.
When the heat button is pressed in lock out mode, the ember bed will flash 6 times until heating mode is turned on
10 SEC
To turn on heat mode, press and hold the heat button for 10 seconds, the ember bed will flash 6 times and the heat function will
be restored.
Display Value
0
1
2
3
4
5
6
7
8
9
N
Button Press
1st Press
2nd Press
3rd Press
4th Press
5th Press
6th Press
7th Press
8th Press
9th Press
12/ 37
Temperature Setting
64°F/18°C
66°F/19°C
68°F/20°C
70°F/21°C
72°F/22°C
74°F/23°C
76°F/24°C
78°F/25°C
80°F/26°C
82°F/27°C
ON
Timer Interval Display Value
1 Hour
2 Hours
3 Hours
4 Hours
5 Hours
6 Hours
7 Hours
8 Hours
OFF NONE
1
2
3
4
5
6
7
8