Battery Backup Assembly Instructions; Power Supply Specifications - LAZBOY Duo Instrucciones De Operación

Battery Backup ssembly Instructions
Replace the power supply batteries every six months
NOTICE:
and after each power failure use.
The performance of the built-in battery backup cannot be guaranteed. The backup system is
designed to return a reclined unit to the upright, closed position for exiting ease during a power
interruption. It is not intended to recline the unit. If you require continuing use during a power outage,
then you should purchase a separate battery backup system. Contact your La-Z-Boy
information.
The operating speed is reduced when operating on battery backup. Additionally, the USB charging
port is disabled when the unit is powered by the battery backup only.
Always maintain constant, even pressure on the button when operating on battery backup to
reduce the energy consumption.
Replace the batteries every six months and after each power failure use.
The battery backup is located in the power supply and uses two 9-volt alkaline batteries (not included).
1. Unplug the 120 volt power cord from the electrical outlet, and disconnect the power supply
from the motor connector.
2. The battery compartment is located on the side of the power supply. Slide the battery cover
up to access the battery compartment.
3. Snap the connection caps on the battery terminals. Place the batteries in the power supply.
4. Slide the battery cover over the batteries.
5. Repeat steps 1– 4 for each power supply.
6. Return to the Assembly Instructions, Step 7.
Power (2) 9-Volt Battery
Supply Alkaline Batteries Cover

Power Supply Specifications:

Input: AC100-240V ~ 50/60Hz 2.0A
Output: DC 29V 1.6A
12
® dealer for more
( age intentionally left blank )
13