Preparing Your Ice Maker; Important Safety Tips - THINK GIZMOS TG20 Manual De Usuario

2. PREPARING YOUR ICE MAKER FOR USE

2.1 Important Safety Tips

When using electrical appliances, basic safety precautions should be followed to reduce the
risk of fire, electric shock, and injury to persons or property.
Read all instructions before using any appliance.
Do not operate this, or any other appliance with a damaged cord.
●
● Connect to properly polarized outlets only.
● No other appliance should be plugged into the same outlet. Make sure that the plug is
fully inserted into the socket.
● Do not run the power cord over carpeting or other heat insulators. Do not cover the
cord. Keep cord away from traffic areas, and do not submerge in water.
● We do not recommend the use of an extension cord, as it may overheat and become a
risk of fire. If you must use an extension cord, use No.14 AWG minimum size and rated
no less than 1875 watts.
● Unplug the ice maker before cleaning or making any repairs or servicing.
● Exercise caution and use reasonable supervision when appliance is used near children.
● Do not use your ice-maker outdoors. Place the ice-maker away from direct sunlight and
make sure that there is at least 4 inches of space between the back of your unit and wall.
Keep a minimum distance of 4 inches on each side of your unit free.
● Do not use other liquid to make the ice-cube other than water.
● Do not clean your ice maker with flammable fluids. The fumes can create a fire hazard or
explosion.
Do not tip over.
●
● If the ice maker is brought in from outside in wintertime, give it a few hours to warm up
to room temperature before plugging it in.
WARNING: This appliance must be earthed.
IMPORTANT:
The wires in this mains lead are colored in accordance with the following
code:
Green or Green with a yellow strip: Grounding
White: Neutral
Black: Live
To avoid a hazard due to instability of the appliance, it must be placed on
an even or flat surface.
5