Copyright; Prior To Use; Inserting/Changing The Battery - Powerfix Profi PDM 300 B1 Manual De Instrucciones

The multimeter must never be exposed to any direct heat sources (for example, heaters) or direct
sunlight or artificial light. Also avoid contact with splashed and dripping water and corrosive
liquids. Never operate the multimeter near water. In particular, the multimeter should never be
submerged in liquid (do not place any items filled with liquid, e.g. vases or drinks, on the
multimeter). Also ensure that the multimeter is not exposed to any excessive shocks or vibrations.
Furthermore, no foreign objects may penetrate the device. Otherwise, the multimeter could be
damaged.

5. Copyright

All information contained in these instructions is subject to copyright and is provided for information
purposes only. It is only permitted to copy or duplicate data and information with the express and
written consent of the author. This also includes commercial use of the content and data. The text and
illustrations are based on the state of the art at the time of printing.

6. Prior to use

Remove the multimeter and the accessories from the packaging.
Check the multimeter and the accessories for signs of damage. If it is damaged, the multimeter must not
be used.

6.1 Inserting/changing the battery

The multimeter is powered by a standard 9V battery. To insert or replace the battery, proceed as
follows:
Switch off the multimeter and remove all test leads before opening the multimeter!
If the battery is exhausted, the
replaced as soon as possible to ensure that the multimeter continues to work properly.
 Loosen the upper screw at the back of the multimeter using the supplied screwdriver and take off the
cover by sliding it upwards.
icon appears on the display [1]. The battery should be
POWERFIX PDM 300 B1
English - 55