Acerca De Boot Manager (Administrador De Inicio) - Dell PowerEdge T630 Manual Del Propietário

Menu Item
System Time
System Date
Asset Tag
Keyboard NumLock
F1/F2 Prompt on Error
Load Legacy Video Option ROM
In-System Characterization

Acerca de Boot Manager (Administrador de inicio)

Boot Manager le permite agregar, eliminar y organizar opciones de inicio. También puede acceder a la
configuración del sistema y opciones de inicio sin necesidad de reiniciar el sistema.
Description
Enables you to set the time on the system.
Enables you to set the date on the system.
Displays the asset tag and enables you to modify it
for security and tracking purposes.
Enables you to set whether the system boots with
the NumLock enabled or disabled. By default, the
Keyboard NumLock is set to On.
NOTE: This option does not apply to 84-key
keyboards.
Enables or disables the F1/F2 prompt on error. By
default, F1/F2 Prompt on Error is set to Enabled.
The F1/F2 prompt also includes keyboard errors.
Enables you to determine whether the system
BIOS loads the legacy video (INT 10H) option ROM
from the video controller. Selecting Enabled in the
operating system does not support UEFI video
output standards. This field is available only for
UEFI boot mode. You cannot set this to Enabled if
UEFI Secure Boot mode is enabled.
This option enables or disables In-System
Characterization. By default, In-System
Characterization is set to Disabled. The two other
options are Enabled and Enabled - No Reboot.
NOTE: The default setting for In-System
Characterization is subject to change in
future BIOS releases.
When In-System Characterization (ISC) is set to
enabled, ISC is executed during POST on detecting
relevant change(s) in the system configuration.
This helps in optimizing the system power and
performance. ISC takes about 20 seconds to be
executed, and system reset is required for ISC
results to be applied. The Enabled - No Reboot
option executes ISC and continues without
applying ISC results until the next time system
reset occurs. The Enabled option executes ISC and
forces an immediate system reset so that ISC
results can be applied. It takes the system longer to
be ready due to the forced system reset. When
disabled, ISC is not executed.
47