Insignia NS-HWG1641 Guia Del Usuario página 11

40" Espresso Wood Finish Open Framed TV Stand
Step 6 Preparing the legs and skirts
:
Caution: Inspect the parts thoroughly before assembling. Disassembly of glued parts is extremely difficult.
1 Fill the holes in the sides of the legs (I) 1/4 to 1/2 full of glue (54M), then insert eight of the wood dowels (15F)
into the holes. Wipe away the excess glue.
2 Fill the holes in the ends of the skirts (K, L, and M) 1/4 to 1/2 full of glue (54M). Make sure not to put glue in the
holes for the cam screws.
3 Attach the legs (I) to the skirts (K, L, and M), then tighten the eight hidden cams.
Note: Make sure that the dowels in the legs go into the holes in the skirts. Wipe away any excess glue.
Surface and edge
with hidden cams.
54M
54M
You'll need:
Fill holes 1/4 to 1/2
full of glue.
54M
Surface and edge
with hidden cams.
Phillips screwdriver
www.insigniaproducts.com
15F
Surface and edge
with hidden cams.
Surface and edge
with hidden cams.
54M
54M
15F (8)
54M (1)
54M
54M
54M
11