Insignia NS-HWG1641 Guia Del Usuario página 16

Step 11 Adjusting the doors
:
The doors may need some adjustments. Follow the text below to make needed adjustments.
Refer to the enlarged diagram to identify the parts on the HINGES.
• To adjust the doors toward either side of the stand (horizontal), loosen the mounting screw several turns, then
turn the adjusting screw in or out. Tighten the mounting screw after making adjustments.
• To adjust the doors toward the top or bottom of the stand (vertical), loosen both vertical adjustment screws.
Move the doors up or down to the desired location. Tighten the screws after making adjustments.
• To adjust the doors toward the back or front of the stand (depth), loosen the mounting screw one turn and move
the doors in or out, as needed. Tighten the
16
40" Espresso Wood Finish Open Framed TV Stand
mounting screw after making adjustments.
You'll need:
Phillips screwdriver
www.insigniaproducts.com
Adjusting screw
(horizontal)
Mounting screw
(depth)
Vertical
adjustment