Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Step 5
Attaching the back
:
1 Carefully turn your unit over onto its front edges, with the finished edges down.
2 Unfold the back (F) and lay it over unfinished back edges of the unit.
3 Align the back to have equal edges along all four sides. Push on opposite corners to "square" the unit, if
required.
4 Using a hammer, fasten the back to the main body of the TV stand with the nails (1N). Make sure that you tap
nails into the holes that line up over the upright.
Note: Perforations have been provided for wire/cable access through the back. Carefully cut out the holes as needed.
The perforations closer to the
edge should be aligned toward
the bottom of the unit.
You'll need:
10
40" Espresso Wood Finish Open Framed TV Stand
1N
Hammer
www.insigniaproducts.com
These holes must line up
over the upright
1N (42)
Tabla de contenido
