Functions Setting - PNI HUNTING 280C Manual De Usuario

damaging the product.
• Remove branches or moving objects from the monitored area that
may cause false photos to be taken.
• Do not place
ventilation equipment, light sources, to avoid taking fake photos.
The camera has 40 IR LEDs and a 52° FOV lens. Use only high-
quality batteries capable of providing enough power to illuminate
consistently in dark environments.
Turning the camera on
Move the switch to the ON position.
The camera will start with the factory settings. So, for testing, the user
only needs to insert an SD card and batteries in the camera

Functions setting

1. Move the switch to the SETUP position. The camera screen will light
up. The camera will enter Test mode.
2. Press ◄, ►, ▲ and ▼ to navigate through settings.
3. Press the OK key to confirm.
4. Press the MENU key to exit the settings interface.
Note: In order for some settings (such as Cam ID, Delay, Time Lapse,
Password) to be saved and take effect, the user must press the MENU
key after pressing the OK key..
9
the camera near heat-emitting equipment,
User manual