Idiomas disponibles
Idiomas disponibles
4. Technical data cooling unit
Power (compressor)
Power uptake (watts)
Cooling power (watts)
For aquaria up to
( T max. 5 °C)
Recommended water flow
(litres/h)
Weight
Cooling gas
Quantity of coolant
Dimensions (l x w x h)
Heat exchanger
Temperature controller
Available spare parts: Please refer to www.aqua-medic.de.
5. Maintenance
The cooler has the same requirements with respect to maintenance like conventional cooling units (refrigerators
etc.). Maintenance and/or repairs should be done exclusively either by a service engineer or by the manufacturer.
Clean the filter sieves and air-cooled condenser regularly. Beforehand, unplug the unit. The filter sieves to
protect the condenser from dust are located on the side and front of the housing. To clean the front filter, the
screw at the bottom of the housing has to be loosened. The side filters are clicked in.
If the condenser is still soiled, the housing is opened with a screwdriver and the lamellas of the condenser are
carefully freed from adhering dust, for example with compressed air.
Without this regular cleaning, fan and compressor may be irreversibly damaged. We recommend to flush the heat
exchanger thoroughly once a year to remove any muddy parts.
6. Warranty conditions
AB Aqua Medic GmbH grants the first-time user a 24-month guarantee from the date of purchase on all material
and manufacturing defects of the device. Incidentally, the consumer has legal rights; these are not limited by
this warranty. This warranty does not cover user serviceable parts, due to normal wear & tear ie: impellers or
drive wheels etc. The original invoice or receipt is required as proof of purchase. During the warranty period, we
will repair the product for free by installing new or renewed parts. This warranty only covers material and
processing faults that occur when used as intended. It does not apply to damage caused by transport, improper
handling, incorrect installation, negligence, interference or repairs made by unauthorized persons. In case of a
fault with the unit during or after the warranty period, please contact your dealer. All further steps
are clarified between the dealer and AB Aqua Medic. All complaints and returns that are not sent to
us via specialist dealers cannot be processed. AB Aqua Medic is not liable for consequential damages
resulting from the use of any of our products.
AB Aqua Medic GmbH - Gewerbepark 24 - 49143 Bissendorf/Germany
Titan 200
Titan 600
0.1 HP
0.25 HP
160 w
345 w
600 w
200 w
250 l
750 l
250 – 1,200
1,000 – 2,500
13 kg
18.6 kg
R 134 a
150 g
150 g
43 x 25.5 x 38 cm 45.7 x 33 x 43 cm
Titanium
digital, accuracy 1 °C, set point adjustion in 1 °C step
- Technical changes reserved – 03/2021/v3
Titan 1600
Titan 2200
0.5 HP
1 HP
480 w
550 w
800 w
1,600 w
1,500 l
2,500 l
1,200 – 3,000
1,500 – 4,000
19.3 kg
19.8 kg
300 g
640 g
48 x 35.5 x 48 cm 56 x 38 x 48 cm
7
