SousVideTools IV300 Manual Del Usuario página 11

EN // USER GUIDE
M A I N T E N A N C E
MAINTENANCE
To avoid burning, please make sure the power is turned off on the machine and it has cool down to room
temperature before cleaning.
1 Place the machine vertically after cleaning, do not place it horizontally or upside down.
2
During cleaning, do not damage the components inside the machine. Once the components are damaged,
please ask specialist to check and repair. Do not attempt unauthorised repairs to avoid accidents.
3
Abandon old water after each use and fill with fresh water next time. If the water is reused many times, some
mineral substance may subside or adhere to the surface of the components, thus influencing the machine
performance.
If you notice the discharge capacity reduce massively or the machine's components are covered in ash and dirt,
please disassemble the low part of the machine's housing to clean the heat tube and probe.
HOW TO DISASSEMBLE QUICKLY
Use the tool to
remove screw
11
Remove the low
part housing to
clean the inner
components
It is recommended to not put the
hot machine in to cool water. The
machine should be cooled down to
room temperature and then put into
cool water to use. Otherwise it will
influence the machine function and
lifetime. We also recommend to not
put a cold machine in to hot water.