Hkoenig DWAT800 Manual De Utilización página 7

Lock button: press it about 3 seconds to unlock, locked without any act within 10-15
seconds, you can lock the screen free by press CONFIRM button
Temp. button: Set the desired temperature according to 45C,55C,65C,75C,85C,100C,000
(normal temperature water)
Volume button: Set the water volume according to 100ml,200ml,300ml,000(flow water
continuously)
Confirm button: Start and stop function setting.
HOW TO USE
Before first use:
If use the appliance for first time, please clean up the water tank before use. Always unplug
from the plug socket and allow to cool down before cleaning,the surface of the water tank
is wiped over with damp cloth and polished with a soft dry cloth, fill in the clean water to
clean, plug in and let the water flowing until tank is empty and repeat the same steps for
several times, then refill the proper clean water to be ready for operation.
Tips:
First use of the appliance: Please operate the appliance under 100C setting for one minute until
the detection of boiling point is finished.
The appliance is ready for use - set the Temp and Volume to desired settings.
1. FILL IN WATER
Open the lid, fill the water tank with the desired amount of water, and then close the lid. Note:
the water level must be less the Max level.