Hkoenig DWAT800 Manual De Utilización página 8

Tips:
• Suggest to use purge water in the appliance
2. OBTAIN DESIRED WATER
Make sure the plug is connected to the proper wall outlet, and fill in the water with desired
amount. Place your cup on the removable water tray, make sure it aligns with the spout. First
press the Lock button about 3-5 seconds to open by finger, Temp. and Volume setting indicator
lights up, and press the Temp. button to choose your desired temperature and press the Volume
button to set right water volume, Last press the Confirm button to operate the appliance, about
5-8s, the desired water will flow out continuously from water spout,when you obtain desired
water, press the Confirm button, the appliance stop work at once, If you want to obtain water
again, only repeat the above procedure.
Remarks:
• Do not touch the boiled water and steam in order to protect against the scald by the boiled
water and hot steam.
If the appliance stop to operate with beep sound and the PCB panel show E7 symbols,
show the water is lack, need pour the cool water in the water tank immediately.
• The appliance can memorize the last operation method anytime without disconnecting
the plug.
• As the appliance has memory function when connecting to plug, please use about 60
second s first in order to obtain desired temperature water, but it's memory will be lost
after unplug.
• As ambient temperature change everyday, the water volume will undulate within -15% to
+15%
• The appliance have manual thermostat to recover the heating function for abnormal
operation,if the unit is no power, stop working, not boiling the water, you can reset
the thermostat by a reset key easily.
Reset hole
Reset key