Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Unit should be programmed with AC power. Do not
program under supercap backup power.
MODE: Press to go to the next mode.
ENTER: Stores or saves current entry.
DAY/YEAR:
a. Press to set the year in the DATE mode.
b. Selects the desired day of the week in the DST (Daylight Savings
Time) mode.
CH1/CH2/OVR1:
a. Press for high-speed pump ON or OFF in AUTO mode (manual
override).
b. Press to remove the HOLD mode without changing the load
status.
DEL/PREV/OVR2:
a. Press to delete the displayed entry.
b. Decrement the last selected entry.
c. Press for low-speed pump ON or OFF in the AUTO mode (manual
override). Unit will begin with a five minute high-speed pump
cycle followed by the low speed pump. If a pump is ON, pressing
this turns it OFF.
HOUR/MONTH:
a. Press to set hour in CLK (clock) mode and the SCH (schedule)
mode.
b. Press to set month in the DATE mode and DST (Daylight Savings
Time) mode.
MINUTE/DATE:
a. Press to set minutes in CLK (clock) mode and SCH (schedule)
mode.
b. Press to set date in the DATE mode.
c. Press to select the week of the month in DST (Daylight Savings
Time).
ENTER:
a. Press to store the displayed information into memory. Informa-
tion will not be stored until the ENTER key is pressed.
Note: During settings, each press of the key will advance one
number. For rapid advance hold key in.
EVENT:
a. Press to select HIGH/LOW/OFF status of the event in SCH
(schedule) mode.
b. Press to update the load status In the AUTO (automatic) mode.
2
1.0 KEY FUNCTIONS:
Tabla de contenido
