TFA 30.3049 Instrucciones Para El Manejo página 10

TFA_No_30.3049_Anleitung_05_17
TWIN PLUS – Wireless Thermo-Hygrometer
• The display shows the current outdoor temperature and
the humidity, the comfort level and the maximum and minimum
values for the past 24 hours.
• Press the SEARCH/IN/OUT button again.
• and the circle symbol
• All outdoor and indoor values will appear alternating for 6 sec-
onds.
• Press the SEARCH/IN/OUT button again to return to normal
mode.
7.4 Comfort level
• On the display appear four different faces to indicate the comfort
level for temperature and humidity.
Cold Comfort
7.5 Alarm for temperature and humidity
7.5.1 Adjust the alarms
• Press and hold the ALERT button at the backside of the basic
unit in normal mode.
• and flash on the display.
• Press ▼/°C/°F or ▲ button to toggle between indoor or outdoor
area.
• Press the ALERT button again.
• and the default or the last adjusted upper temperature limit
appear on the display.
• Press the ▼/°C/°F or ▲ button to adjust the desired upper tem-
perature limit.
• Confirm with the ALERT button.
• and the default or the last adjusted lower temperature limit
appear on the display.
• Press ▼/°C/°F or ▲ button to adjust the desired lower tempera-
ture limit.
• Confirm with the ALERT button.
• and the default or the last adjusted upper humidity limit
appear on the display.
18
17.05.2017 10:16 Uhr
appear on the display.
Hot Very hot
Seite 10
TWIN PLUS – Wireless Thermo-Hygrometer
• Press ▼/°C/°F or ▲ button to adjust the desired upper humidity
limit.
• Confirm with the ALERT button.
• and the default or the last adjusted lower humidity limit
appear on the display.
• Press ▼/°C/°F or ▲ button to adjust the desired lower humidity
limit.
• Confirm with the ALERT button.
7.5.2 Activate the alarms
• Press SEARCH/IN/OUT button in normal mode to toggle
between indoor or outdoor area.
• Confirm with the ALERT button.
• appears on the left display. The temperature alarm function
is actived.
• Press the ALERT button again to activate only the humidity
alarm. appears on the right display.
• Press the ALERT button again to activate both alarms.
appears on both displays.
• Press the ALERT button again to deactivate the alarm functions.
disappears on both displays.
7.6 Case of alarm
• In the case of an alarm the corresponding symbol flashes
and an alarm sound is acitivated. You can stop the alarm by
pressing any button. If the alarm will not turned off, it will auto-
matically turn off after approximately 2 minutes.
7.7 Indication of frost
• If the outside temperature is between -2 ° C and +3 ° C the
snowflake symbol appears on the display.
7.8 Outdoor transmitter
7.8.1 Temperature indication
• Press °C/°F button to change between °C (Celsius) or °F
(Fahrenheit) as temperature unit.
19