Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Technical Information
Type
Voltage
Amperage
Frequency
Insulation class
Power
l
RPM
ll
(On Load)
lll
l
Max. Drill Diameter
ll
Stone
lll
l
Max. Drill Diameter
ll
Concrete
lll
Collar
Drill connection
Weight
Due to continuous product development and technical improvements, technical information may be changed without prior
notice.
General preventative measures and encl safety instructions has to be followed
Technical Description
The A-2012 is an insulated diamond core drilling machine for WET and DRY use in combination with diamond core drilling for
drilling holes in stony materials and concrete. The drilling machine can be used manually as well as in combination with a drill
platform. This machine is suited for right as well as left handed personnel.
Voltage
The drill machine may only be connected to the voltage which is stated on the type illustration and only works with 1-phase.
The machine is insulated according to European Guidelines and consequently may only be used via a trip switch (PRCD) with an
under voltage safety level of < 10 mA on an earthed electrical mains.
Main components
A-2012
A-2012
230 / 240
V~
9,5
A
50 / 60
Hz
I
2000
W
450
MIN-1
1050
2000
200
Ø mm
120
80
150
Ø mm
80
40
60
Ø mm
½"G x
Female x Male
5/4"UNC
7,5
kg
6
Noise Emissions and Vibrations ( EN 50144-2-3)
Acoustic pressure measured is 82 DB (A)
Measured acoustic pressure permitted is 92 dB
Acceleration bears < 2,5 m/s
Wear Hearing
Wear Eye
protection
protection
1
Side handle
2
Cooling grooves
3
Carbon brush holders
4
Water level
5
Softgrip
6
PRCD
7
Overload indication
8
Pistol grip
9
Switch
10
Air outlet
11
Gear switch
12
Dust extraction (dry drilling)
13
Waterconnection (wet drilling)
14
Collar 60 mm
15
Drill connection
16
Spanner insert – 32 mm
ENG
2
Wear a dust mask
07/06
Tabla de contenido
