Tabla de contenido
Idiomas disponibles
Idiomas disponibles
SCALE LOW POINT: Minimum process input value in Pt -100 and TC inputs.
-1999 for fixed dual point display adjust-ment used inputs, Scale low point is
the lowest one from
or
for selectable dual point display adjustment used inputs
display adjustment scale low point is the lowest one from
multipoint used inputs.
SCALE HIGH POINT: Maximum process input value in Pt-100 and TC inputs.
9999 for fixed dual point display adjust-ment used inputs, Scale high point is
the biggest one from
or
for selectable dual point display adjustment used inputs
display adjustment scale high point is the biggest one from
for multipoint used inputs.
PROPORTIONAL BAND SHIFTING
((-SCALE HIGH POINT / 2 ), (SCALE HIGH POINT / 2 ) )Unit
If cooling function is performed ; Cooling process set value
is calculated by adding set value
Control form can be ON/OFF or PID.
If set value for heating =
Set value for cooling =
SENSOR BREAK OUTPUT VALUE
(FOR HEATING PID 0.0, 100.0)%
(FOR COOLING PID -100.0, 0.0)%
When sensor breaks, controlling of the process can continue
by entering % output value to
If this parameter 0.0,process control output does not perform an output when
sensor breaks.
Soft Start Set value
It can be adjusted from 0 to 9999 with increment and decrement buttons. If
parameter is selected
When the device power on, if the Soft start set value different from
temperature value is lower than soft start value on processes, device starts soft
start operation,until temperature reaches soft start set value. On soft start device
output period will be SSCt parameter value and device control output will be
SSCo parameter value.
with parameter
+
then
+
+
parameter.
, Soft start function becomes inactive.
or
for
or
and
11
Tabla de contenido
