Tabla de contenido
Idiomas disponibles
Idiomas disponibles
CONTROL PERIOD TIME (1, 150)
Process output period time.
MINIMUM CONTROL OUTPUT ( 0.0% ,
It is % of minimum output.
Even as a result of the PID calculation device calculates the
% output value less than this parameter, heating or cooling
output is active minimum for OLL parameter.
MAXIMUM CONTROL OUTPUT (
It is % of maximum output.
Even as a result of the PID calculation device calculates the
% output value greater than this parameter, heating or
cooling output is active maximum for OUL parameter.
MINIMUM CONTROL OUTPUT TIME ( 0.0 sec ,
Heating or cooling output can not be active less than this
parameter. Even if this parameter is 0, this parameter is
accepted 50 msecs for security.
ANTI-RESET WINDUP
While PID operation is running if
-
<= process value <=
condition is true, integral value is calculated. If the
condition is not true, integral value is not calculated and
last calculated integral value is used.
If Ar Parameter is selected
band is used for heating PID process instead of Ar
Parameter and cooling proportional band is used for
cooling PID process instead of Ar Parameter.
SET VALUE OFFSET
((-SCALEHIGH POINT / 2) , (SCALE HIGH POINT / 2) )Unit
+
is used as set value in PID calculations. It is
used for shifting the proportional band.
PID OUTPUT OFFSET
(FOR HEATING PID 0.0, 100.0)%
(FOR COOLING PID -100.0, 0.0)%
This parameter is added to "Output %" which is calculated at
the end of the PID.
OUTPUT OFFSET RELATED TO PID SET
(FOR HEATING PID 0.0, 100.0)%
(FOR COOLING PID -100.0, 0.0)%
This parameter is added to the % process output that is
calculated at the end of the PID according to process set value.
*
/ (
PROCESS VALUE STABILIZATION
(1, SCALE HIGH POINT)Unit
It is used for controlling if process value oscillates or not
when
parameter is
-
<= Process Value <=
is not true, then device start tune operation automatically.
Second
, 100.0%)
(0, SCALE HIGH POINT)Unit
, heating proportional
-
)
or
if;
+
)
)
+
condition
10
Tabla de contenido
