AIPTEK Q20 Manual De Usuario página 13

User's Manual
Troubleshooting
Symptom
The projector still can't be
turned on after 10
seconds of waiting.
The projecting image is
too blurry.
The temperature of the
projector's surface is
warm.
The projector does not
work when connecting to
a notebook PC.
Check Point
Ensure the battery is fully
charged.
1. Adjust the focus by using
focus wheel.
2. Check if the projection lens
is clean or not, clean it if
dirty.
It is normal for this projector to
generate moderate heat
during operation.
1. Check if the HDMI cable is
plugged correctly.
2. Make sure the PC has been
switched to projector
display.
8