GB
JC-114
INHALATION THROUGH NOSE
Please install the mask
Kindly note that your nose should be inside the
mask, as shown by image D/a
1. Please press the power switch in order to adjust
the nebulisation rate.
2. Once the nebulisation has ended, unplug the
main unit.
Note: After every treatment switch off the
appliance for 3 minutes
CLEANING
Before cleaning the appliance, always plug out.
After each use always clean accurately all the accessories to remove every possible
residues of medicinal. Wash carefully each used component under running warm
water. If necessary add a little amount of not aggressive cleansing solution. Rinse
abundantly, drain any water and dry thoroughly into a clean ambient. Use a soft,
damp cloth to wipe the body, the cover and the tank clean. Drain any water and dry
thoroughly into a clean ambient. Don't use soap or powder that can damage the
surface. To avoid infections or chemical reactions, don't use twice the same drug-
holder medicine cup.
NEVER WASH THE BODY UNDER RUNNING WATER.
How to disinfect the product
Disinfect every day the product how it is explained underneath.
Wash used accessories with chemical disinfectant, easily searchable at a drugstore
and suitable to plastic material.
To correctly dose the disinfectant read the instruction shown on the disinfectant
itself. Rinse carefully under running water and dry.
Maintenance activities other then cleaning and parts disinfection can be carried out
only by staff authorized by Life Tool Technologies S.p.A.
ACCESSORIES
Supplied accessories have been studied and experimented to cure high and low
respiratory tracts. They are made of non-toxic material and show an elevated
chemical strength.
ULTRASONIC NEBULIZER
19
D/a
D/b