Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Assembly Examples
Be sure to follow Safety and Assembly Instructions. Keep in mind the actual
operation of your machine and the effect it has on overall stability.
Direction of Roll
4. Select and arrange the Corners and the Side Rails as
necessary to assemble the base to your machine's
footprint. Position Side Rails into corners as far as is
practical.
a. Below is a standard arrangement, but many different
arrangements are possible. You can use 1, 2, or 3
rails on either side.
b. For larger machine's, purchase additional rails online
at http://www.boratool.com/rail-kit-w-hardware-
pm1000-htc2000
5. Bolt the Side Rails to the corners and each other using
these simple rules:
a. All connections require the use of (2) M6-12 bolts
and (2) M6 nuts at each end of the connections
Note: Insert bolts so that the nuts are on the inside of
the mobile base.
6. Re-check dimensions, then tighten all bolts and nuts.
A long, narrow base,
such as on a jointer,
would benefit from
this arrangement.
Most machines may
be arranged to the
convenience of the user.
5
A short, narrow base, such
as found on a drill press
or bandsaw, may benefit
Direction of Roll
from this arrangement. Due
to swivel rotation, base
may sit out of level. Rotate
swivel wheel away from
base to correct.
4 a
4 b
5
Tabla de contenido
