Auxilab 4260/50 Manual De Usuario página 66

Step 7. Adjust the position of the W lamp
Switch on the power(the Switch Mirror should be placed to the
position as indicates). Observe the entrance facular, adjust the W
Lamp until the light is in the center of the entrance hole.
Step 8. Finish
Reset the cover of the light chamber and fix the screws. Reset the
cover of the instrument and fix the screws. Recover the Pole in the
compartment, then the course finished.
Replace the Battery
Danger! Be sure to switch off the power and unplug the
socket before replacement!
Step 1. Prepare the tools
Prepare a 6×150mm Cross Blade Screwdriver.
Step 2. Switch off the power supply
Switch off the power supply and unplug the socket.
Step 3. Open the Bottom cover plate
Unscrew all the screws indicated then remove the bottom plate.
Right Position
Switch
Mirror