Battery Maintenance - Liberty Pumps 441 Manual De Instalación

Charger LED Status
Power
Explanation
Red
LED
AC Power connected,
ON
battery disconnected
Soft Start Charge ON
Bulk Charging ON
Absorption Charge ON
Fully Charged ON
Battery in reverse
ON
polarity connection
Battery Cells Shorted ON
Battery Bad Cells
ON
Detection
Battery Weak or
ON
Sulfated
AC Power OFF OFF
– 14 –
Full/
Charging Fault
Float
Amber Green Red
LED LED LED
OFF OFF OFF
FLASH OFF OFF
ON OFF OFF
ON OFF OFF
OFF ON OFF
OFF OFF ON
OFF OFF FLASH
OFF OFF FLASH
OFF FLASH OFF
OFF OFF OFF
Copyright © Liberty Pumps, Inc. 2019 All rights reserved.
M a i ntena nce
Pump Maintenance
The pump should be checked frequently for debris and/or
build-up that may interfere with pump or float switch operation.
The float must be free to move without any restriction through its
complete travel.
Periodically (at least every three months) test the pump to ensure
proper function. This may be done by disconnecting power to the
primary pump so that the water level rises to activate the back-up
pump. Be sure to follow all safety precautions and remember to
reconnect power to the primary pump and verify proper operation
after conclusion of the test.
Charger Maintenance
To reduce risk of electric shock, unplug charger from AC outlet
before attempting any maintenance or cleaning. Turning off
controls will not reduce this risk.
Store in clean, dry place. Occasionally clean the case and cords
with a dry cloth. No other maintenance is required. Do not
disassemble charger, cord, or any associated part. Take it to a
qualified service center when service or repair is required.
Incorrect reassembly may result in a risk of electric shock or fire.

Battery Maintenance

Follow the battery manufacturer's recommendations for
maintenance and safe use of battery.
4414000D