Tabla de contenido
Idiomas disponibles

Idiomas disponibles

AIR CONDITIONER FEATURES
DISPLAYS:
DISPLAYS:
Shows the set temperature in
Auto-timer settings.While on Fan only mode,it shows
the room temperature.
Error codes:
AS-Room temperature sensor error-Unplug the unit
and plug it back in.If error repeats, call for service.
NOTE:In Fan only mode,it will display LO or HI .
E S
-
Evaporator temperature sensor error-Unplug the
unit and plug it back i n.If error repeats , call for
service.
E 7
-
Unit malfunction-Unplug the unit and plug it back in.
If error repeats, call for service.
NOTE:
If the unit breaks off unexpectedly due to the power
cut, it will restart with the previous function setting
automatically when the power resumes.
Air Directi onal Louvers
Levers
Air Direction
The louvers will allow you to direct the air flow Up or
Down(on some models) and Left or Right throughout
the room as needed. Pivot horizontal louvers until
the desired Up/Down direction is obtained.
Move the Levers from side to side until the desired
Left/Right direction is obtained.
ADDITIONAL TH INGS YOU SHOULD KNOW
Now that you have mastered the operating procedure,
here are more features in your control that you should
become familiar with.
The Cool circuit has an automatic 3 minute tim e
delayed start if the unit is turned off and on quickly.
This prevents overheating of the compressor and
possible circuit breaker tripping.The fan will
continue to run during this time.
The control is capable of displaying temperature in
degrees Fahrenheit or degrees Celsius. To convert
from one to the other, press and hold the Left and
Right Temp/Timer buttons at the same time, for 3
seconds.
Displays
O
C or
O
F and the
"
"
"
"
"
"
"

CARE AND CLEANING

CAUTION
Clean your air conditioner occasionally to keep it looking
new. Be sure to unplug the unit before cleaning to
prevent chock or fire hazards.
Air Filter Cleaning
"
Take out the filter
Pull out the front panel
Theairfiltershouldbecheckedatleastonce two weeks to see
if cleaning is necessary. Trapped particles in the filter can
build up and cause an accumulation of frost on the cooling
coils.
11
Tabla de contenido
loading

Este manual también es adecuado para:

Kstaw08qd

Tabla de contenido