Setting The Meter And Deleting The Memory - Fora G20 Manual De Instrucciones

Setting the Meter and Deleting the Memory

Your meter comes with the time, date, unit of measurement, memory deletion and
alarm function setting. If you need to reset these parameters, please follow the
steps below.
Start with the meter off. Then press the set button
located in the battery compartment.
The meter is now in the setting mode.
STEP 1. Set the Year
After pressing the set button, the year, a blinking number,
will be shown on the screen screen. Press and release the
M button to plus one year. You can also keep pushing down
the M button to proceed faster. When the correct year is
displayed, press the set button and then a flashing number,
which stands for the month, is shown.
STEP 2. Set the Month
Press and release the M button until you see the correct
month. To move faster, keep pushing the M button down.
When the desired month is displayed, press the set but-
ton and then the day will flash.
16
SET
CR2032
BATTERY