Orima ORPE-09 Libro De Instrucciones página 25

＊ After selecting COOL or HEAT mode, press SLEEP on remote
control (or press UP and TIMER on operating panel
simultaneously) to enter SLEEP mode, both upper and lower
fans are forcibly set at LOW speed. In approximate 7h the air
conditioner turns off automatically. If SLEEP is to be cancelled,
press SLEEP again or conversion mode to cancel the sleep
function.
＊ Press SWING to turn off or turn on the swing function.
2. DEHUMIDIFY mode
＊ In on or timer on state press MODE to select DEHUMIDIFY
mode. At the moment the corresponding indicator lamp is on.
＊ Temperature and speed are not adjustable.
＊ Press SWING to turn off or turn on the up/down swing function.
3. FAN mode
＊ In on or timer on state press MODE to select FAN mode. At the
moment the corresponding indicator lamp is on.
＊ Press SPEED to select appropriate speed, and LOW, MID and
HIGH speeds can be circularly selected. In this mode press
SPEED for "5s" to run the internal dry function, i.e. both upper
and lower fans work simultaneously. Press SPEED for another
"５s" to cancel the internal dry function.
＊ Temperature is not adjustable.
＊ Press SWING to turn off or turn on the up/down swing function.
Cautions:
1. When full water indication is displayed, the air conditioner
will stop work, you should drain water in time. After
drainage the air conditioner will start automatically.
2. In DEHUMIDIFY and FAN (including the internal dry function)
modes, you need not use exhaust pipe.
3. If your room faces the sun directly, please draw the
curtains.
- - 7 - -
EN