Erreka MAXI Guía Rápida De Instalación Y Programación página 11

3 Mount the track (1) + operator (2) on the supports (3) and (4).
4 Position the anchoring (5) in the upper part of the door using the arms
(6) and (7), and couple it to the carriage (8).
5
6 Install the central mount (9).
8 Close the door and install the closing stopper
(12) until it comes up against the carriage (11).
Use two self-drilling, self-tapping screws.
O
The track (1) must be horizontal.
5
7
5 Tighten the nut as far as possible,
and then loosen it slightly until the
sleeve can be turned by hand.
8
6
P260D
7 Open the door and install the opening stopper
(10) until it comes up against the carriage (11).
Use two self-drilling, self-tapping screws.
P277F
P277C
P260E
P277G
P277H
11