Health O Meter 2500 KL Instrucciones De Uso página 20

SETUP / BATTERIES (CONTINUED)
Replacing / Inserting Batteries (2500KL / 2600KL)
1. Unplug the AC adapter from the power source.
2. Remove the battery cover on the side of the display head by unscrewing the (2) battery cover
screws (see Figure 11).
3. Replace or install the batteries with new units. Health o meter recommends using an alkaline
or lithium battery, rated for 130°F (54°C) operation. Do not use Zinc-Carbon batteries.
4. Re-attach the battery cover to the display assembly.
Warning: If the scale will not be used for some time, remove the batteries to avoid a
safety hazard. Disposal of batteries must be performed in accordance with the prevailing
national, regional or local regulations which apply to you.
Figure 11
20