D-Link DSL-584T Guía De Instalación Rápida página 12

Configuring the Router (continued)
Static IP Connections
Static IP is used to set the Static IP mode for the Router. Static IP is used whenever a known
static IP address is assigned. The accompanying information such as the Subnet mask and
the gateway should also be specified in order to be able to connect. These are the servers
would enable you to have access to other web servers. Information entered here must come
from your ISP. You may change the PVC (Permanent Virtual Channel) settings and the
Encapsulation.
Enter the VPI
and VCI
numbers that
have been
Type the IP addresses
provided by
for the WAN IP
your ISP.
Address, Subnet Mask,
ISP Gateway Address,
Primary DNS Address
and/or Secondary DNS
Address, as instructed
by your ISP.
Select the Connection Type as
1483 Bridged IP LLC, 1483
Bridged IP VC-Mux, 1483 Routed
IP LLC, 1483 Routed IP VC-Mux
or IPoA, as instructed by your ISP. Click the Next button. Skip ahead to the Setup
Completed menu below.
12