X210/X215W/X218W3K/X21T
8 x X210 with X215W/X218W3K/X21T subwoofers
2 x X210 with 1 x X215W/X218W3K or 2 x X21T (stacking)
2.3. Control and Connection panel
The X210A control panel contains the following elements:
A) LCD: Displays basic information about the DSP Status
B) KEYPAD: Allows the user to perform basic operations on the DSP such as IP
address setting, Preset selection, etc.
C) STATUS LEDS: Report a special event happening in the system
Protect: (Red) A fault condition is being reported by the amplifier. If this LED is
constantly lit even after resetting the device, please contact the technical
service.
Standby: (Orange) This led is lit when the equipment is set in Low Power
Consumption mode. This mode can only be set through the PC connection.
12
[LONGTHROW]
[LONGTHROW]
[COMPACT or
LONGTHROW]
[COMPACT] or
[STACK-2]
Oct 2017
[NEARFIELD]
Amate Audio