KitchenAid KSMVSA Manual De Instrucciones página 5

USING THE STAND MIXER ATTACHMENT
ASSEMBLING THE FRESH PREP SLICER/SHREDDER ATTACHMENT
1
Turn the Stand Mixer off and unplug.
For Stand Mixers with a hinged attachment hub cover: Flip up to open.
3
For Stand Mixers with a removable attachment hub cover: Turn the attachment
knob counterclockwise to remove attachment hub cover.
Insert the attachment shaft housing
into the attachment hub, making
certain the power shaft fits into the
square hub socket. If necessary, rotate
4
the attachment back and forth. The
pin on the attachment housing fits
into the notch of the hub rim when
in the proper position.
Slide the blade you want to use into
the housing. You will hear a click
2
when the blade snaps into place
properly on the drive shaft.
Tighten the Stand Mixer attachment
hub knob until the attachment
is completely secured to the
5
Stand Mixer. Make sure that hub
knob is properly seated in the
retention hole in the attachment.
USING THE STAND MIXER ATTACHMENT | 5