Pulsar HD6580B Manual Del Usuario página 19

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

CAUTION!
Air Filter (See Fig 20)
A dirty air filter will reduce the life span of the engine, make it difficult to start the engine, and reduce the unit's performance.
To clean, remove the air filter cover.
Carefully pull the air filter out by lifting up along the edges.
Remove dirt from filter by tapping on it or having it blown out. Replace with new filter annually.
Reinstall air filter so that it seals and replace air filter cover.
Checking Spark Plug (See Fig 21)
Disconnect the spark plug wire from the spark plug.
Before removing the spark plug, clean the area around its base to prevent debris from entering the engine.
Clean carbon deposits off the electrode with a wire brush.
Check the electrode gap and slowly adjust to .700 mm - .80 mm (.028 - .031") if necessary.
Reinstall spark plug and tighten to Torque 22.0 – 26.9 Nm (16-20 ft-lb).
Reconnect spark plug wire.
If spark plug is worn replace only with an equivalent replacement part. Spark plug should be replaced annually.
(BOSCH F7TC, NGK BP6ES, CHAMPION N9YC or Equivalent)
Used oil should be disposed of at an approved disposal site.
Fig 20
MAINTENANCE
19
.700-.800mm
Fig 21

Capítulos

Tabla de contenido

Solución de problemas

loading

Tabla de contenido