NOTES ON OPERATING THE WATCH
ADJUSTING THE STOPWATCH HAND POSITION
•
When the stopwatch is or has been measuring or is stopped, if the crown is pulled out to the
second click, it will automatically reset the STOPWATCH hands to "0".
TIME SETTING
•
When setting the hour hand, be sure to check that AM/PM is correctly set. The watch is so
designed that the date changes once in 24 hours.
•
When setting the minute hand, first advance it 4 to 5 minutes ahead of the desired time and
then turn it back to the exact minute.
SETTING THE DATE
•
It is necessary to adjust the date at the end of February and 30-day months.
•
Do not set the date between 9:00 p.m. and 1:00 a.m. Otherwise, the date may not change
properly.
STOPWATCH
•
Restart and stop of the stopwatch can be repeated by pressing button A.
•
Measurement and release of split time can be repeated by pressing button B.
ILMYM92
34
ILMYM92
TO PRESERVE THE QUALITY OF YOUR WATCH
MAGNETISM
Your watch will be adversely
affected by strong magnetism.
Keep it away from close contact
with magnetic objects.
SHOCKS & VIBRATION
Light activities will not affect your
watch, but be careful not to drop
your watch or hit it against hard
surfaces, as this may cause
damage.
CHEMICALS
Be careful not to expose the watch to
solvents, mercury, cosmetic spray,
detergents, adhesives or paints.
Otherwise, the case, bracelet, etc. may
become discolored, deteriorated or
damaged.
CARE OF CASE AND BRACELET
To prevent possible rusting of the
case and bracelet caused by dust,
moisture and perspiration, wipe
them periodically with a soft dry
cloth.
PERIODIC CHECK
It is recommended that the watch be
checked once every 2 to 3 years.
Have your watch checked by an
AUTHORIZED FESTINA GROUP DEALER
to ensure that the case, crown,
buttons, gasket and crystal seal remain intact.
PRECAUTION REGARDING
CASE BACK PROTECTIVE FILM
If your watch has a protective film
and/or a sticker on the case back,
be sure to peel them off before
using your watch.
35