Installation instructions for AX-LCD
Using the LCD screen
• Press and hold the "return/esC" button on the LCD screen
for 5 seconds until "select Interface" comes up.
• Select "Connection type", and then press "enter".
• Scroll up or down to "Direct Connect", and then press "enter".
• Once done, press "return/esC" to back out of that mode.
Main menu options:
• red adjusts the red backlighting of the LCD
(ranges from 1 to 32).
• Blue adjusts the blue backlighting of the LCD
(ranges from 1 to 32).
• Green adjusts the green backlighting of the
LCD (ranges from 1 to 32).
• Contrast adjusts the contrast of the LCD
(ranges from 1 to 100).
• reset puts the color back to the default settings.
METRA. The World's best kits.
Note: The vehicle menu will vary from car to car.
For more information, please see the owner's
manual that came with the vehicle.
arrow up - Toggles "up" through menu options
arrow Down - Toggles "down" through
menu options
return/esC - Return to the previous menu
enter - Enter current menu option
™
1-800-221-0932
IMPOrtaNt WarNING
This product includes instructions for installation which must
be carefully followed. The instructions are worded in such a
manner to assume that the installer is capable of completing
these type of electronic installations. If you are unclear as
to what you are instructed to do or believe that you do not
understand the instructions so as to properly and safely
complete the installation you should consult a technician who
does have this knowledge and understanding.
Failure to follow these instructions carefully and to
install the interface as described could cause harm
to the vehicle or to safety systems on the vehicle.
Interference with certain safety systems could cause
harm to persons as well. If you have any questions in
this regard please call the Help line or Metra at
1-800-221-0932 for assistance.
metraonline.com
© COPYRIGHT 2004-2015 METRA ELECTRONICS CORPORATION
K
P
NOWLEDGE IS
OWER
Enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take steps
toward a better tomorrow.
Metra recommends MECP
certified technicians