Tecno-gaz FREE Serie Manual De Instrucciones página 15

7. Initial operation / Putting into operation
A
C
E
B
D
F
7.1. How to mount the drain duct tube socket
1. Unscrew the closing plug (A); turn anti-clockwise.
2. Screw on the tube socket (B) clockwise (included in delivery volume).
3. Connect ½" tube of required length (not included in delivery volume).
Fasten the tube with hose clip (included in delivery volume).
7.2. How to connect the unit to the mains
Connect mains input socket (C) to a grounded shock-proof socket with the
mains cable (included in delivery volume) (D). The mains voltage must
correspond with the voltage indicated on the nameplate of the unit.
7.3. How to fill the transducer tank
1. Fill the transducer tank up to 2/3 or up to the marking on the tank wall with
water (E).
Caution: Do not use any solvents or acids!
2. Add a suitable cleaning chemical; for the concentration follow the
instructions on the label.
Recommended cleaners: TECNO-GAZ Multisteril cd.
+ English +
5