Charging The Batteries; Screen Icon - Extel O'CUP Instrucciones De Uso E Instalación

Attach the monitor to the adjustable bracket (fig.5) then attach the "suction cup" foot to a
smooth, flat surface (fig.6). Install the monitor at approximately 1 m above the ground (for
optimum reception conditions). For installing the monitor, choose a location away from
reinforced concrete walls, mirrors, metallic shelves, etc... Keep the monitor away from all
appliances creating strong electrical interference. Any strong electrical environment may
cause disturbances and interferes with the use (WIFI in particular).
Adjust the angle of the monitor using the tools provided for this purpose (fig. 2)
For installation on a wall, gently pierce the foot and screw in place with screws and bolts
(fig.7). Note, the suction feature can no longer be used.
The camera/monitor kit is already paired in the factory. Do not use a camera from ano-
ther kit without calling our hotline (+33 (0) 892 350 069)
c. Charging the batteries
CAUTION
Before using the monitor for the first time, you shall: CHARGE THE BATTERIES FOR
AT LEAST 12 HOURS
1. Connect the cord of the 5V
BATT indicator turns green).
2. Plug the adaptor into a 230 VAC mains socket and charge the batteries for at least 12
hours
3. Use without adaptor: lithium battery with 4-hour battery life.
• Displaying the battery charging status
When the batteries are about to be discharged, the symbol
monitor. If the monitor is not charged, it turns off automatically in case of too low voltage,
until it is placed back on a mains socket.
d. Screen icon
adaptor to the "power supply" plug of the monitor (the
Level of signal
Very good
Good
Low
Absent
CFI EXTEL O'CUP - 02/2013 - V1
displays on the screen of the
Level battery charging
Full battery
Battery life 4h
Sufficient battery
Low battery
Empty battery
GB4