Monitor; Installation And Directions For Use; Attachment Of The Wall Bracket; Connecting The Cameras To The Monitor - Extel WESV 87047 SER.R3 Instrucciones De Uso

c. Monitor
1. Settings selection
2. Settings - / previous viewing
3. ON/OFF
4. Settings +/ next camera viewed
5. Camera viewing / VGA mode (not used)
6. At the rear of the receiver, outlet for the 12V
compliant with standards in force: NFC 15-100 for France).
4

INSTALLATION AND DIRECTIONS FOR USE

Choose a suitable location to install the camera.
As far as possible your system must be installed in a dust-free place with weak vibrations and a good circulation of
air and must be equipped with a wall socket for the 12 V
Important: connect and plug the adapter once the installation of the monitor and the cameras is completed.
a. Attachment of the wall bracket
• Make sure that no element interferes with the installation.
• Search for a suitable place to fix the bracket.
• Screw the wall part with the supplied screws (use bushing if necessary).
• Screw the camera on the bracket.
• Aim the camera at the desired direction
Important: Do not rotate the monitor in front of direct sun light or strong light.
b. Connecting the cameras to the monitor (fig.3)
• Simply place on a piece of furniture or a stable surface.
• Connect the cables of the cameras to the colour / colour extension wires.
• Connection of the "cameras" extension wires to the monitor
c. Use of the kit
Commissioning
• Connect the 12 V output of the adapter to the monitor (6, fig.2)
• Connect the mains adapter to a 230 V~ outlet.
• To use your WESV 87047 SER.R3, it is recommended to use the remote control unit which includes more
functions than the monitor.
• Press the On/Off button "
Settings
To access the different settings press the "MENU" key of the remote control unit.
Use the < and > keys to modify the parameters.
If necessary, you can change the following settings:
"BRIGHT": the brightness of the image, if the image is too bright or too dark, set the brightness.
"COLOR": colour adjustment.
"CONTRAST" the contrast of the image, an image too contrasted can be harmful for the sight and mark the
screen.
7. VGA plug (not used)
8. Camera plug
9. video output
plug of the adapter (adapter to connect to an installation
adapter.
" on the remote control.
CFI EXTEL WESV 87047 SER.R3 - 06/2011 - V1
3GB