Troubleshooting - Rena Ware IC-350 Uso Y Mantenimiento

Troubleshooting

After pressing the Power Button, the Power Indicator Light does not
go on
• the plug may be loose in the outlet.
• the Power Button may not have been fully depressed.
• check your home's circuit fuse or breaker switch to see it is operating
properly.
After depressing the Power Button, the Power Indicator Light starts
flashing
• you may be using a utensil unsuitable for induction cooking (non-magnetic).
• the utensil may not be centered properly on the ceramic Plate.
• the ceramic plate may be cracked (contact your consultant or customer
Service center).
The unit stops heating during operation
• High surface temperature caused it to shut-off automatically.
• the cool Air Intake or Warm Air exhaust may be blocked.
• the unit became unplugged during cooking.
• check your home's circuit fuse or breaker switch to see it is operating
properly.
The Cooking Temperature Lights don't seem to be working
• the cooking temperature lights will not operate when the unit is set to the
warming function. Press the Increase temp button to change from warming
to cooking mode.
Error Codes
there are a number of pre-programmed error codes that you may see in the
timer Indicator display window. the error codes "e3" and "e6" are overheating
warnings. If you see either of these codes, turn the unit off for 5 minutes, then
turn it back on. If the problem persists, or you see any other error code, contact
your Rena Ware representative or customer Service.
Servicing Your Induction Cooker
For service, please contact your Rena Ware representative or a customer
Service center. never attempt to repair or disassemble the unit by yourself if
service is required.
12