Assembly Instructions - Lance Lab AEROSOL 3 Manual De Funcionamiento

Assembly instructions: AerosoL 3
EN
Telescopic Lance
1. Pull off the cap and remove the
lance and hose kit from the Protective
3. Straighten the hose kit (after removing
straps) by pulling gently.
5. Firmly push the tubing straw
end into the hole on the white cap
Note: 5 x actuator caps are supplied with your new lance. Additional packs
available from distributors and our website.
-6-
Tube.
(actuator).
2. Remove the rubber top cap from lance.
4. Remove the original cap from
your aerosol canister as shown
above.
6. Fit the AerosoL 3
cap on to the aerosol
canister.