GB
Buttons & Icons
Home - When selected on any
screen this will revert you to the
homepage
Settings - This will take you into the
'Settings Menu' where changes can be
made to the language, date, time etc.
Screen Feedback Signal
When an icon or button is selected on screen a single beep will be heard to confirm the action requested.
Surround Signal Coding
These four different screen surround signal colours represent the following:
Service or Maintenance
Mode. User modification
in progress.
User Settings
The following three screen options can all be accessed by starting from the 'Home Page' then
by using the 'Settings Icon', select the 'Settings Home Page'. From here you can then select the
menu required:
Languages (Only where available)
Select the languages menu and then the flag of the language you require the controller to display all further text
in. If you don't set a specific language within 20 seconds the controller will revert to the home screen without
making any changes. Again 'Set' has to be pressed to save any changes made.
Manual Defrost
Select 'Defrost' from the menu page. This will initiate a manual defrost and
the defrost screen will show with the time counting down until the end of
cycle, displayed by progression blocks. These slowly fill with colour to show
the cycle progress.
3
Controller not operating
or in Standby. User
attention not required
Time/Date Setting
To amend the time or date, select the 'Time and Date' menu option which
opens a new screen. From here, using the up and down arrows you can edit
not only the time and date but also the format this shows in. Once you have
finished modifying these settings press the set button to save the changes
made. If this isn't pressed no changes will be saved.
Back - When pressed this will take you
back to the previous screen
Information - When pressed this will
give a summary of what is currently
happening with the unit.
Process or system
issue. User intervention
required.
Chill cycle under way.
User attention not
required.