Hansgrohe Raindance Showerpipe 27192 1 Serie Manual De Instrucciones página 4

1
2.
4 mm
2
3
4
2.
4
1.
4 mm
English
Installation
Remove the dust cover (1).
Close the stops using a 4 mm Allen
wrench (2).
Cut the plaster shield so that it extends ¹⁄₁₆" - ⅛" outside
the surface of the finished wall.
Seal the wall around the plaster shield
using waterproof sealant.
Failure to seal the wall may result in
water damage.
Remove the flush insert and seals.
Flush the supplies:
Use extreme caution when carrying out
this step.
1.
(1) Carefully open both stops.
(2) Allow the hot and cold supplies to flush.
() Close both stops.
3.
closed
open