Important - COMENDA PC Serie Instrucciones Para El Uso Y El Mantenimiento

Part 1: Use and safety instructions
1.1 GENERAL DESCRIPTION
Single skin body, stainless steel execution AISI 304.
Hood activated cycle start and manual cycle start.
Removable rack holder. Single piece deep pressed
tank; multiple filtration system (whole tank filter and
pump suction filter) .Built in rinse aid dosing pump.
Provision for detergent dosing pump connection.
Multifunction and multi-colour START button 4 preset
cycles (ECO/GLASSES/PLATES/INTENSIVE) with
customisable duration and temperatures. Tempera-
ture display (wash and rinse). Cycle progress status
indications. Alarm diagnostics. Optional: drain pump and stainless steel washing arms.
1.2 TyPE OF USE AND
CONTRAINDICATIONS
The machines were designed and built to wash dishes
in specific dish racks, using detergent and rinse agent.
• Objects allowed: glasses, mugs, cups, saucers,
cutlery, inserted in specific dish racks, made of
suitable material for dishwashers and small enough
for the dish rack and machine.
• All specific detergents and rinse agents for industrial
dishwashers normally found on the market may be
used.
ATTENTION
Any improper use of the machine relieves the
manufacturer from all liability for accidents
to objects or persons and terminates any
warranty conditions.
1.3 TRANSPORT, SHIPPING and
STORAGE (Fig. 2)
- The machine is normally shipped inside a cardboard
box secured with straps.
- Use a forklift truck or pallet truck to transport the
packed machine, placing the box on the relative
forks.
ATTENTION
The machine must only be shipped and stored shel-
tered against atmospheric agents.
1.4 CHECkS UPON RECEIPT
When the supply is received, check that the packages
are intact and visually not damaged.
If all is intact, remove the packaging (unless differ-
ent instructions are given by the manufacturer) and
check that the machine has not been damaged during
transportation.
Check for any structural damage, crushing or break-
age.
If any damage or imperfections are found:
1- Immediately notify the carrier either by telephone
or through registered mail with acknowledgment
of receipt;
2- Inform the manufacturer priori to registered mail with
acknowledgment of receipt.

IMPORTANT

Any damage or faults must be promptly reported
and in any case within 3 days from the data of
receipt of the machine.
1.5 UNPACkING (Fig. 2-3)
Proceed as follows to remove the machine from the
packaging:
1. Remove the straps (1) securing the box.
2. Remove the box (2), lifting it upwards.
3. Remove the protective film from the machine.
4. Remove the machine from the base, lifting it from the
bottom of the body (Fig. 3).
5. All packaging elements must be collected and not left
in the reach of children as they are sources of danger.
They must be disposed of as solid urban waste.
ATTENTION
Once the machine has been unpacked, NEVER
lift it from the electric components box.
Lift the machine from the bottom of the body. Place it on
the forks of the forklift truck to transport it.
1.6 MACHINE
IDENTIFICATION (Fig. 4)
- The serial number and relative machine data are written
on the rating plate (3) on the right side of the machine.
IMPORTANT
To request technical support or to order spare parts, al-
ways include the model and serial number of the machine.
1.7 DESCRIPTION OF THE SAFETy
DEVICES
• The PC models are equipped with a safety microswitch
which blocks the wash pump when the tank capote is
opened accidentally.
• Electric parts closed by panels secured with screws.
• Electric equipotential earth electrode.
• Safety overflow (13) Fig.8 to prevent water from over-
flowing.
1.8 REGULATORy REFERENCES
•
The machine and its safety devices are built in
compliance with the following standards:
• Essential safety requirements set forth by directives
2006/42/EEC (MD), 2014/35/EEC (LVD), 2014/30/
EEC (EMC).
•
Requirements set forth by directive 2002/95/EEC
(RoHS).
ENGLISH
13