Correct And Proper Use - ProMinent DULCOTEST CLB1-mA-10ppm Instrucciones De Montaje Y Funcionamiento

Introduction
CAUTION!
Prerequisites for operation
Possible consequence: Slight or minor
injuries, material damage
– The sensor may only be used with
ProMinent type DLG III or DGM flow
gauges. Only in this way can the flow
parameters be maintained
– There must be a free outlet or at most
a counter pressure of 1 bar at the
outlet of the flow gauge
– The sensor's voltage supply may not
be interrupted
– Following longer interruptions to the
voltage supply (> 2 h), allow the
sensor to run-in again and recalibrate
it
1.4

Correct and Proper Use

NOTICE!

Correct and Proper Use

– The sensor may only be used to
determine and regulate concentra‐
tions of free chlorine
– The sensor may not be used in con‐
junction with organic chlorine com‐
pounds, such as trichloroisocyanuric
acid, or stabilisers, such as cyanuric
acid
– Any other uses or modifications to the
system are prohibited
– The sensor is not a safety component
34