Proper Use - Ibx H01 Manual De Instrucciones

•
If the stirring bar contains PTFE, please note:
•
•
•
Check the instrument and the accessories for damage prior to every use. Do not use damaged components. A safe
operation is only guaranteed with the accessories described in the "Accessories" chapter. Accessories must be securely
attached to the device and cannot come off by themselves. Always disconnect the plug before the assembly or
disassembly of accessories.
•
Ensure that the external temperature sensor is inserted into the media to a depth of at least 20 mm.
•
When using metal vessels, do not place the temperature sensors on the bottom of the vessel.
Placing sensors on the vessel bottom can cause temperatures that are too high to be measured, especially in media
that have poor conductivity. The tip of the measuring sensor must be at least 5 mm away from the vessel bottom; a
distance of 10 mm is ideal.
•
The instrument can only be disconnected from the main power supply by pulling out the mains plug or the connector
plug.
•
The voltage stated on the label must correspond to the main power supply.
•
Ensure that the cable does not touch the heating base plate. Do not cover the device.
•
Keep away from high magnetic fields.
•
Observe the minimum distances between devices, between the device and the wall, and above the assembly
(min.100mm).

2. Proper Use

The instrument is designed for mixing and/or heating liquids in schools, laboratories, or factories. This device is not suitable
for use in residential areas or other restrictions mentioned in Chapter 1.
Elemental fluorine, trifluoride ion, and alkali metals will corrode PTFE. Halogen hydrocarbons
expand PTFE at room temperature.
Molten alkali, alkaline earth metals or their solution, as well as elements on second and third
column of the Periodic Table of elements will react with PTFE if the temperature reaches 300 ~
400 ºC
>100mm
Figure 1
4