Handlebar Cable Routing - Electric - Cervélo S3 Manual De Montaje

HANDLEBAR CABLE ROUTING – ELECTRIC
Brake
E-Wire
A. 750 mm E-Wire
to Left Shifter
C. 1400 mm
E-Wire to
Junction B
B. 300 mm E-Wire
to Right Shifter
Junction A
EW-RS910
Tighten stem faceplate
bolts to 6 Nm.
1. Install shifters on handlebar and connect
Left and Right using the 750 mm E-Wire A.
2. Install 300 mm E-Wire B connecting
Junction A (EW-RS910) to Right shifter.
3. Thread 1400 mm E-Wire C from frame,
through stem, connecting it to Junction A.
4. Place brake housing and E-Wires in the
appropriate channels of the handlebar. (note
that brake housing should exit the channel
before the stem).
5. Attach handlebar to stem, and attach brake
and shifting controls as per manufacturer's
instructions.
Brake housing should
exit the channel on
the underside of the
handlebar before the
stem.
22