Intended Use; Scope Of Delivery; Technical Description - Spelsberg BCS Pure Instrucciones De Montaje

Ocultar thumbs Ver también para BCS Pure:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Warning
Health hazard
Do not operate the charging station at outside temperatures below –25 °C or above +40 °C.
In case of fire, do not remove the cover of the E-Bike charging station.
Use extinguishing agent only approved for electronic devices. Do not use water for
extinguishing.
This device can be used by children from 8 years of age and persons or mental capabilities
or with lack of experience and knowledge unless they are supervised or have received
instructions on the safe use of the device and are aware of the resulting hazards.
Children must not play with the device.
Cleaning and user maintenance may not be carried out by children without supervision.

Intended Use

Depending on the version, E-bike charging stations are suitable for direct charging of LEVs
(Light Electric Vehicle, e.g. E-Bikes, E-Scooter, Pedelecs) with the following rechargeable batteries:
Bosch Active Line, Active Line Plus, Cargo Line, Performance Line, Performance Line CX
Shimano BT-E6000, BT-E6001, BT-E6010, BT-E8010, BT-E8020
Data without guarantee of completeness. Please refer to your LEV manufacturer's details.
Moreover, LEV rechargeable batteries of other manufacturers can also be charged if the respective external
charger is connected to a 230 V socket. The maximum charge current per socket is 2.5 A.
The E-Bike charging stations are intended for wall-mounting indoors and protected outdoor areas.

Scope of delivery

Quantity Description
1
Charging station
6
Cap screws with standard screw head for sealing
1
Set external fixing brackets 10 mm, GEOS ABL-10
1
Set external fixing brackets 40 mm, GEOS ABL-40
1
Cover opening tool 8 mm triangle
1
Screw connection M25, BCS SMART only
1
Stepped nipple M32
1
Operating instructions
1
Operating instructions / assembly instructions

Technical description

The charge current of both protective contact sockets is limited to max. 2.5 A.
The direct connections for the manufacturer-specific rechargeable batteries deliver the supply
voltage for the respective LEVs. The cable management for the cable permanenty connected
supports the correct use with the lines. The E-Bike charging station is equipped with a special
ventilation and venting system. The station monitors the charging processes and indicates this via LEDs.
22

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Bcs smart

Tabla de contenido