UPPAbaby G-LUXE Manual De Instrucciones página 6

STROLLER OPERATION
ADJUSTING THE SEAT HARNESS
STEP 1: Undo buckle and slide harness fastener off
through opening in buckle clip. Repeat on other side.
STEP 3: Feed harness straps and buckles through
desired slots.
REMOVING THE SEAT PAD
NOTE: Undo buckle and slide harness fastener off through opening in buckle clip. Repeat on other side.
STEP 1: Push harness straps and STEP 2: Remove top of pad.
buckles through holes in seat pad.
30C
CLEANING Machine wash seat fabric with harness
SEAT PAD, SEAT
straps separately in cold water on
FABRIC WITH
gentle cycle with mild detergent.
HARNESS
STRAPS
8
STEP 2: Push harness straps and buckles through holes
in seat pad.
STEP 4: Reattach shoulder harness fasteners.
STEP 3: Remove bottom of pad.
Carefully slide pad off of adjustable
footrest.
DO NOT bleach, iron
Dry flat and away from
direct sunlight before or dry clean.
re-use or storage.
STROLLER OPERATION
REMOVING THE SEAT FABRIC
NOTE: Remove canopy prior to removing seat fabric.
STEP 1: Undo buckle and slide harness fastener off
through opening in buckle clip. Repeat on other side.
STEP 3: Release side seat fabric buttonhole openings
from posts on both sides of stroller frame.
STEP 5: Remove back seat pockets STEP 6: Release bottom seat fabric
from posts on both sides of seat from buttonhole openings located on
frame. posts found on both sides of stroller
frame.
NOTE: Reverse steps to replace seat fabric and harness straps on stroller frame.
CLEANING
Hand wash in cold water with
CANOPY
mild detergent.
AND BASKET
STEP 2: Undo snaps (located on both sides) which
attach seat back to stroller frame.
STEP 4: Slide harness waist straps through openings in
seat fabric.
STEP 7: Slide seat bottom pocket
off frame.
Dry flat and away from direct DO NOT bleach, iron
sunlight before re-use or storage.
or dry clean.
9